This is gvd.info, produced by makeinfo version 4.0 from gvd.texi.


File: gvd.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)

Using the GNU Visual Debugger
*****************************

   Using the GNU Visual Debugger

   GVD, the GNU Visual Debugger

   Version 1.2.4

   Date: 2001/11/21 15:48:34

   Copyright (C) 2000-2001, ACT-Europe.  This document may be copied,
in whole or in part, in any form or by any means, as is or with
alterations, provided that (1) alterations are clearly marked as
alterations and (2) this copyright notice is included unmodified in any
copy.

* Menu:

* Introduction::
* Description of the main windows::
* Integrating GVD::
* Debugging a program remotely::
* Environment::
* Frequently Asked Questions::

 --- The Detailed Node Listing ---

Description of the main windows

* The Menu Bar::
* The Tool Bar::
* The Call Stack Window::
* The Data Window::
* The Memory Window::
* The Explorer Window::
* The Source Window::
* The Assembly Window::
* The Debugger Console::
* The Status Line::

Integrating GVD

* General Information::
* Using GVD with Glide::
* Using GVD with Emacs::
* Using GVD with XEmacs::
* Using GVD as a Library::
* Using GVD as a Corba Object::

Debugging a program remotely

* Using GVD with a Remote Debugger::
* Using GVD with a Remote Program::

Environment

* Command Line Options::
* Environment Variables::
* Files::
* Limitations::
* Reporting bugs::

Frequently Asked Questions


File: gvd.info,  Node: Introduction,  Next: Description of the main windows,  Prev: Top,  Up: Top

Introduction
************

GVD is a graphical front-end for text-based debuggers such as GDB.  A
knowledge of the basics of the underlying debugger used by GVD will help
understanding how GVD works and what kind of functionalities it
provides.  Please refer to the debugger-specific documentation (e.g the
GDB documentation) for more details.

   The purpose of a debugger such as GVD is to allow you to see what is
going on within another program while it executes, or what a program
was doing at the moment it crashed.


File: gvd.info,  Node: Description of the main windows,  Next: Integrating GVD,  Prev: Introduction,  Up: Top

Description of the main windows
*******************************

* Menu:

* The Menu Bar::
* The Tool Bar::
* The Call Stack Window::
* The Data Window::
* The Memory Window::
* The Explorer Window::
* The Source Window::
* The Assembly Window::
* The Debugger Console::
* The Status Line::


File: gvd.info,  Node: The Menu Bar,  Next: The Tool Bar,  Up: Description of the main windows

The Menu Bar
============

   The menu bar provides operations that act either at a global level,
or on a specific debugger. Since GVD can handle multiple debuggers at
the same time, the commands that deal with debugging on a specific
module always use the current debugger to perform the various
operations specified by the menus. Key shortcuts are available for the
most common operations, and are displayed in the menus themselves.
Here is a detailed list of the menu items that can be found in the menu
bar:

File
----

Open Program...
     Opens a file selection dialog that allows you to choose a program
     to debug. The program to debug is either an executable for native
     debugging, or a partially linked module for cross environments
     (e.g VxWorks).  Do not use this menu to edit a source file, see
     the *Note The Explorer Window::, or the *Note open source menu::.

New Debugger...
     Opens a dialog to create a new debugger window. By default, the
     Replace Current Debugger check button is active, and the new
     debugger window will replace the current debugger. Otherwise, it
     will be added in the main window as an additional debugger.  This
     dialog allows you to specify the name of the executable to debug by
     entering its name in the Program File entry, or by clicking on the
     ... button to open a file selection dialog. You can also select
     the machine on which your underlying debugger (e.g GDB) will run.
     By default, the debugger will run on the current machine (the
     machine on which GVD is running), so you only need to specify a
     value if you want to do remote debugging.  For more information,
     see *Note Debugging a program remotely::.

Open Core Dump...
     This will open a file selection dialog that allows you to debug a
     core file instead of debugging a running process. Note that you
     must first specify an executable to debug, by either using the
     *Note open program menu::, or by specifying the name of the
     executable on the command line (*note Command Line Options::).

Add Symbols...
     Add the symbols from a given file/module. This corresponds to the
     gdb command add-symbol-file. This menu is particularly useful
     under VxWorks targets, where the modules can be loaded
     independently of the debugger.  For instance, if a module is
     loaded on the target while GVD is running, it is absolutely
     required to use this functionality, otherwise GVD/gdb won't be
     able to work properly.

Edit Source
     Launches an external editor that will open the file currently
     displayed in the source window (see *Note The Source Window::).
     You can specify the name of the external editor by using the *Note
     preferences menu::.

Open Source...
     Opens a file selection dialog that allows you to load any source
     file in the source window. You can also directly open the source
     files used in your application by using *Note The Explorer
     Window::.

Open Session...
     Opens a dialog giving you the list of sessions that are saved in
     the `$HOME/.gvd/sessions' directory on Unix systems, and
     `%HOME%\.gvd\sessions' on Windows systems. The Session List area
     lists all such sessions. The Session field shows the current
     selection (which can be specified either by entering the name on
     the keyboard, or by clicking in the Session List window). The
     right area gives you a list of sub-sessions, or of debuggers
     launched during a selected session. You can select any of the
     debuggers of a specific session in order to replay one, some, or
     all of them.  To select the debuggers, either click on the check
     box on the left of each item, or use the Select All and Unselect
     All buttons.  If you confirm by clicking on the OK button, GVD
     will open a new debugger for each sub-session selected and will
     replay all the commands automatically.

Save Session As...
     Opens a dialog similar to the Open Session dialog, allowing you to
     specify the name of the session to save, and what
     sub-sessions/debuggers to save.  By default, this will save all
     the sub-sessions ran in GVD since start up.

Attach To Process...
     Instead of starting a program to debug, you can instead attach GVD
     to an already running process. To do so, you need to specify the
     process id of the process you want to debug. The process might be
     busy in an infinite loop, or waiting for event processing. Note
     that as for *Note core files::, you need to specify an executable
     before attaching to a process.

Detach Process
     Detaches the currently debugged process from the underlying
     debugger.  This means that the executable will continue to run
     outside GVD. You can use the Attach To Process menu later to
     re-attach to this process.

Change Directory...
     Open a directory selection dialog to change the directory in the
     underlying debugger. This is useful before executing a process, or
     when loading a file using a relative path.

Close
     Closes the current debugger. If this is the only debugger, the
     main window will remain visible, but with a gray area instead of
     the notebook containing the Data, Explorer, Source and Debugger
     windows.  To create a new debugger, see also the *Note new
     debugger menu::.

Exit
     Saves the window settings and exit GVD.

Edit
----

   The only item currently available in this menu is the preferences
menu.

Preferences...
..............

   Opens a dialog window allowing you to modify the global preferences
of GVD.  To enable the new preferences, you simply need to confirm by
pressing the OK button. The preferences will be saved in a file located
in `$HOME/.gvd/preferences' on Unix systems, and
`%HOME%\.gvd\preferences' on Windows systems.

   To simply test your changes, you can use the Test button. Pressing
the Cancel button will undo all your changes.

   The preferences dialog is composed of five areas, accessible through
the tabs at the top of the dialog, labelled General, Source, Data,
Command, Memory, Helpers. Each page corresponds to a section of
preferences.

General
     Gives access to the general preferences in GVD.

    Break On Exceptions
          Specifies whether a breakpoint on all exceptions should be
          set by default when loading a program.

    Status Bar Time Out
          Specifies the time interval after which a message in the
          status bar will disappear. Messages that have disappeared can
          be displayed using the arrow in the bottom left area of the
          main window.

    File Extensions
          Indicates the filename extensions that are recognized for
          each of the following supported languages: Ada, C, C++.  Each
          text entry is a semicolon separated list of filename
          extensions, e.g `.ads;.adb' for Ada files.

Source
     You can modify the preferences for the Explorer, Source, and
     Assembly windows, in particular the font and colors used to
     highlight elements.

    Display Explorer Tree
          Indicates whether the list of files should be displayed.

    File Name Background
          Indicates the color used for the background of the file name
          in the editor.  This is also used for the background of the
          current frame in the Call Stack window.

    Font
          Indicates the font used in the editor.

    Show Line Numbers
          Specifies whether line numbers should be displayed in the
          code editor.

    Show Lines with Code
          Specifies whether dots should be displayed in the code editor
          for lines that contain code.

    Automatic Display of Variables
          Specifies whether tooltips should appear automatically to
          display the value of the variable under the cursor.

    Syntax Highlighting
          Indicates whether the editor should provide color
          highlighting.

    Strip Carriage Return
          Indicates whether Carriage Return characters should be
          stripped when reading a file.  GVD tries to detect this
          automatically, but in some rare cases it can be useful to
          enable this option manually.

    Comments
          Indicates color to be used used for comments.

    Strings
          Indicates color to be used for string literals.

    Keywords
          Indicates color to be used for keywords.

    Current Line
          Indicates color to be used for highlighting the current line
          in the editor

Data
     Lets you change the preferences of the Data Window, in particular
     the fonts and colors used to display the data graphically.

    Clickable Item
          Indicates color to be used for the items that are clickable
          (e.g pointers).

    Title Background
          Indicates color to be used for the background of the title.

    Changed Data
          Indicates color to be used to highlight fields that have
          changed since the last update.

    Auto-Refreshed
          Indicates color to be used for auto-refreshed items.

    Frozen
          Indicates color to be used for frozen items.

    Separate Window
          Specifies whether the Data window should be a separate window.

    3D Look
          Specifies whether the items should have a 3d look.

    Item Name
          Indicates font to be used for the name of the item.

    Item Value
          Indicates font to be used to display the value of the item.

    Item Type
          Indicates font to be used to display the type of the item.

    Hide Big Items
          Specifies whether items larger than a given size will start
          in a hidden state.

    Big Item Height
          Specifies that items taller than this value will start hidden.

    Detect Aliased (shared data structures)
          If enabled, do not create new items when an item with the
          same address is already present on the canvas.

    Display Grid Points
          Specify whether the grid should be displayed in the canvas.

    Auto-Align Displays on Nearest Grid Point
          Specify whether items should be aligned on the grid.

    Show Call Stack
          Specify whether the Call Stack view should be shown in the
          data window.

Command
     Enables you to change the preferences of the Debugger Console, also
     known as the Command Window.

    Color Highlighting
          Sets the color used to highlight debugger commands and
          prompts.

    Font
          Sets the font name and size for the Debugger Console. Note
          that it is recommended to use a fixed size font such as
          Courier to get a better looking display.

Memory
     Gives access to the preferences related to the memory view window.
     The values are currently not taken into account.

    Font
          Sets the font name and size to display the contents of the
          memory. It is recommended that you use a fixed size font such
          as Courier to get a better looking display.

    Default Color
          Indicates the color to be used by default in the memory view
          window.

    Color Highlighting
          Indicates the color to be used for highlighted items in the
          memory view.

    Selection
          Indicates the color to be used for selected items in the
          memory view.

    Modified
          Indicates the color to be used for modified items in the
          memory view.

Helpers
     Helpers are external programs that are used by GVD to perform
     specific actions.

    Edit Sources
          This command specifies the program used by the Edit Current
          Source menu.  This specification uses two special arguments:
          %f which is replaced by the full path name to the current
          file, and %l which is replaced by the current line number.
          This specification is superseded by the environment variable
          `GVD_EDITOR' if it exists (see also *Note GVD_EDITOR::).  Try
          e.g using "xterm -e /bin/vi %f +%l" if you prefer vi.

    List Processes
          This command generates a list of processes suitable for
          process actions such as attach. Under Windows, a stand alone
          executable called `winps' is provided to implement this
          capability.

    Remote Shell
          Command to be used to establish a remote connection (see
          *Note Using GVD with a Remote Debugger::).

    Remote Copy
          Command to be used to copy files remotely (see *Note Using
          GVD with a Remote Debugger::).

    HTML Browser
          Command to be used to browse HTML files, in particular the
          HTML version of this help file.

          By default, GVD will reuse an existing netscape browser. You
          can force the use of a new netscape by changing the "HTML
          browser" helper to
               netscape -no-session-management

Program
-------

Run/Start...
     Opens a dialog window allowing you to specify the arguments to
     pass to the program to be debugged, and whether this program
     should be stopped at the beginning of the main subprogram. If you
     confirm by clicking on the OK button, the program will be launched
     according to the arguments entered.

Step
     Execute the program until it reaches a different source line.

Step Instruction
     Execute the program for one machine instruction only.

Next
     Execute the program until it reaches the next source line,
     stepping over subroutine calls.

Next Instruction
     Execute the program until it reaches the next machine instruction,
     stepping over subroutine calls.

Finish
     Continue execution until selected stack frame returns.

Continue
     Continue execution of the program being debugged.

Interrupt
     Asynchronously interrupt the program being debugged. Note that
     depending on the state of the program, you may stop it in
     low-level system code that does not have debug information, or in
     some cases, not even a coherent state. Use of breakpoints is
     preferable to interrupting programs. Interrupting programs is
     nevertheless indispensable in some situations, for example when the
     program appears to be in an infinite (or at least very
     time-consuming) loop.

Command
-------

Command History...
     Opens a dialog with the list of commands executed in the current
     session.  You can select any number of items in this list and
     replay the selection automatically.

Clear Window
     Clears the debugger console window. This removes the recording of
     interchanges between GVD and the underlying debugger, and resets
     the scrollbar accordingly.

Data
----

   Note that most items in this menu need to access the underlying
debugger when the process is stopped, not when it is running. This
means that you first need to stop the process on a breakpoint or
interrupt it, before using the following commands. Failing to do so
will result in blank windows.

Call Stack
     Displays/hides the Call Stack window inside the Data window.
     See *Note The Call Stack Window:: for more details. Note that you
     can       also display or hide the call stack at the preferences
     level, see       *Note Show Call Stack::.

Threads...
     Opens a new window containing the list of threads currently
     present in       the executable as reported by the underlying
     debugger. For each thread,       it will give information such as
     internal identifier, name and status.        This information is
     language- and debugger-dependent. You should refer to       the
     underlying debugger's documentation for more details.        As
     indicated above, the process being debugged needs to be stopped
       before using this command, otherwise a blank list will be
     displayed.

     When supported by the underlying debugger, clicking on a thread
     will       change the context (variables, call stack, source file)
     displayed by GVD,       allowing you to inspect the stack of the
     selected thread.

Tasks...
     For GDB only, this will open a new window containing the list of
     Ada       tasks currently present in the executable. Similarly to
     the thread       window, you can switch to a selected task context
     by clicking on it, if       supported by GDB. See the GDB
     documentation for the list of       items displayed for each task.

     As for the thread window, the process being debugged needs to be
     stopped       before using this window.

Edit Breakpoints...
     Opens an advanced window to create any kind of breakpoint. For
     simple       breakpoint creation, see the description of the
     source window.

Examine Memory...
     Opens a memory viewer/editor. See *Note The Memory Window:: for
     more       details.

Display Local Variables
     Opens an item in the Data Window containing all the local variables
          for the current frame.

Display Arguments
     Opens an item in the Data Window containing the arguments
     for the current frame.

Display Registers
     Opens an item in the Data Window containing the machine registers
         for the current frame.

Display Any Expression...
     Opens a small dialog letting you specify an arbitrary expression
        in the Data Window. This expression can be a variable name, or
     a       more complex expression, following the syntax of the
     underlying debugger.        See the documentation of e.g gdb for
     more details on the syntax.        The check button Expression is
     a subprogram call should be enabled       if the expression is
     actually a debugger       command (e.g `p/x var') or a procedure
     call in the program being       debugged (e.g `call my_proc').

Refresh
     Refreshes all the items displayed in the Data Window.

Help
----

GVD Manual...
     Opens this documentation in an HTML browser (as specified in the
     *Note HTML browser::).

About...
     Opens a simple information box about GVD.


File: gvd.info,  Node: The Tool Bar,  Next: The Call Stack Window,  Prev: The Menu Bar,  Up: Description of the main windows

The Tool Bar
============

The tool bar can be detached from the main window, using the left area:
  click on this left gray area, and move your mouse outside the
window. The    tool bar will be detached and its form will also change
from a horizontal    bar to a vertical bar with two columns.     To
move it back to the main window, double click on the left area.

Run
     Executes the program using the arguments set previously (e.g on
     the command line).

Start
     Same as Run, but stops at the beginning of the main subprogram.

Step
     Executes the program until it reaches a different source line.

Stepi
     Executes the program for one machine instruction only.

Next
     Executes the program until it reaches the next source line,
     stepping over subroutine calls.

Nexti
     Executes the program until it reaches the next machine
     instruction, stepping over subroutine calls.

Finish
     Continues execution until selected stack frame returns.

Cont
     Continues execution of the program being debugged.

Up
     Goes up one frame in the call stack.

Down
     Goes down one frame in the call stack.

Interrupt
     Asynchronously interrupts the program being debugged. Note that
     depending on the state of the program, you may stop it in low
     level system code that does not have debug information, or in some
     cases, not even a coherent state. Use of breakpoints is in general
     preferable to interrupting programs.


File: gvd.info,  Node: The Call Stack Window,  Next: The Data Window,  Prev: The Tool Bar,  Up: Description of the main windows

The Call Stack Window
=====================

The call stack window gives a list of frames corresponding to the
current    execution stack for the current thread/task.     The top
frame corresponds to the outermost frame where the thread is
currently stopped. This frame corresponds to the first function
executed by the current thread (e.g main if the main thread is in C).
 You can click on any frame to switch to the caller's context, this
will    update the display in the source window. See also the up and
down    buttons in the tool bar to go up and down one frame in the call
stack.

   The contextual menu (right mouse button) allows you to choose which
 information you want to display in the call stack window (via check
buttons):
   * Frame number: the debugger frame number (usually starts at 0 or 1)

   * Program Counter: the low level address corresponding to the
         function's entry point.

   * Subprogram Name: the name of the subprogram in a given frame

   * Parameters: the parameters of the subprogram

   * File Location: the filename and line number information.

   By default, the subprogram and parameters are displayed.     You can
hide the call stack window using the menu Data->Call Stack, and    show
it again using the same menu (this menu item is a check button that
can be enabled/disabled)


File: gvd.info,  Node: The Data Window,  Next: The Memory Window,  Prev: The Call Stack Window,  Up: Description of the main windows

The Data Window
===============

Description
-----------

The data window contains all the graphic boxes that can be accessed
using the Data->Display menu items, or the data window    Display
Expression... contextual menu, or the source window    Display
contextual menu items, or finally the    graph command in the debugger
console.

   For each of these commands, a box is displayed in the data window
with the following information:

   * A title bar containing:
        * The number of this expression: this is a positive number
          starting        from 1 and incremented for each new box
          displayed. It represents the        internal identifier of
          the box.

        * The name of the expression: this is the expression or variable
                specified when creating the box.

        * An icon representing either a flash light, or a lock.
          This is a clickable icon that will change the state of the
          box from        automatically updated (the flash light icon)
          to frozen (the lock        icon).         When frozen, the
          value is grayed, and will not change until you change
          the state. When updated, the value of the box will be
          recomputed each        time an execution command is sent to
          the debugger (e.g step, next).

        * An icon representing an 'X'.         You can click on this
          icon to close/delete any box.

   * A main area.       The main area will display the data value
     hierarchically      in a language-sensitive manner. The canvas
     knows about data structures      of various languages (e.g `C',
     `Ada', `C++') and will      organize them accordingly.       For
     example, each field of a record/struct/class, or each item of an
       array will be displayed separately. For each subcomponent, a
     thin box      is displayed to distinguish it from the other
     components.

   A contextual menu, that takes into account the current component
selected    by the mouse, gives access to the following capabilities:
Close component
     Closes the selected item.

Hide all component
     Hides all subcomponents of the selected item. To select a
     particular field or item in a record/array, move your mouse over
     the name of this component, not over the box containing the values
     for this item.

Show all component
     Shows all subcomponents of the selected item.

Clone component
     Clones the selected component into a new, independant item.

View memory at &component
     Brings up the memory view dialog and explore memory at the address
     of the component.

Set value of component
     Sets the value of a selected component. This will open an entry box
     where you can enter the new value of a variable/component. Note
     that GDB does not perform any type or range checking on the value
     entered.

Update Value
     Refreshes the value displayed in the selected item.

Show Value
     Shows only the value of the item.

Show Type
     Shows only the type of each field for the item.

Show Value+Type
     Shows both the value and the type of the item.

Auto refresh
     Enables or disables the automatic refreshing of the item upon
     program execution (e.g step, next).

   A contextual menu can be accessed in the canvas itself (point the
mouse to    an empty area in the canvas, and click on the right mouse
button) with the    following entries:
Display Expression...
     Open a small dialog letting you specify an arbitrary expression
       in the Data Window. This expression can be a variable name, or a
          more complex expression, following the syntax of the current
     language and       underlying debugger.        See the
     documentation of e.g gdb for more details on the syntax.
     The check button Expression is a subprogram call should be enabled
          if the expression is actually not an expression but rather a
     debugger       command (e.g `p/x var') or a procedure call in the
     program being       debugged (e.g `call my_proc').

Align On Grid
     Enables or disables alignment of items on the grid.

Detect Aliases
     Enables or disables the automatic detection of shared data
     structures.  Each time you display an item or dereference a
     pointer, GVD looks at all the items already displayed on the
     canvas and compares their addresses with the address of the new
     item to display. If they match, (for example if you tried to
     dereference a pointer to an object already displayed).  GVD will
     not create a new item, but it will create a link to it.

Zoom in
     Redisplays the items in the data window with a bigger font

Zoom out
     Displays the items in the data window with smaller fonts and
     pixmaps. This can be used when you have several items in the
     window and you can't see all of them at the same time (for
     instance if you are displaying a tree and want to clearly see its
     structure).

Zoom
     Allows you to choose the zoom level directly from a menu.

Manipulating items
------------------

Moving items
............

   All the items on the canvas have some common behavior and can be
fully manipulated with the mouse.  They can be moved freely anywhere on
the canvas, simply by clicking on them and then dragging the mouse.
Note that if you are trying to move an item outside of the visible area
of the data window, the latter will be scrolled so as to make the new
position visible.

   Automatic scrolling is also provided if you move the mouse while
dragging an item near the borders of the data window. As long as the
mouse remains close to the border and the button is pressed on the item,
the data window is scrolled and the item is moved. This provides an
easy way to move an item a long distance from its initial position.

Colors
......

   Most of the items are displayed using several colors, each conveying
a special meaning. Here is the meaning assigned to all colors (note
that the exact color can be changed through the preferences dialog;
these are the default colors):

black
     This is the default color used to print the value of variables or
     expressions.

blue
     This color is used for C pointers (or Ada access values), i.e. all
     the variables and fields that are memory addresses that denote
     some other value in memory.

     You can easily dereference these (that is to say see the value
     pointed to) by double-clicking on the blue text itself.

red
     This color is used for variables and fields whose value has
     changed since the data window was last displayed. For instance, if
     you display an array in the data window and then select the Next
     button in the toolbar, then the elements of the array whose value
     has just changed will appear in red.

     As another example, if you choose to display the value of local
     variables in the data window (Display->Display Local Variables),
     then only the variables whose value has changed are highlighted,
     the others are left in black.

Icons
.....

   Several different icons can be used in the display of items. They
also convey special meanings.

trash bin icon
     This icon indicates that the debugger could not get the value of
     the variable or expression. There might be several reasons, for
     instance the variable is currently not in scope (and thus does not
     exist), or it might have been optimized away by the compiler. In
     all cases, GVD will update the display as soon as the variable
     becomes visible again.

package icon
     This icon indicates that part of a complex structure is currently
     hidden.  Manipulating huge items in the data window (for instance
     if the variable is an array of hundreds of complex elements) might
     not be very helpful. As a result, GVD gives you the opportunity to
     shrink part of the value to save some screen space and make it
     easier to visualize the interesting parts of these variables. See
     *Note hiding big items:: to enable or disable this facility, and
     to set the threshold used to hide items automatically.

     Double-clicking on this icon will expand the hidden part, and
     clicking on any sub-rectangle in the display of the variable will
     hide that part and replace it with that icon.

     See also the description of the contextual menu to automatically
     show or hide all the contents of an item. Note also that one
     alternative to hiding subcomponents is to clone them in a separate
     item (see the contextual menu again).


File: gvd.info,  Node: The Memory Window,  Next: The Explorer Window,  Prev: The Data Window,  Up: Description of the main windows

The Memory Window
=================

The memory window allows you to display the contents of memory by
specifying either an address, or a variable name.

   To display memory contents, enter the address using the C
hexadecimal notation: 0xabcd, or else the name of a variable, e.g foo,
in the Location text entry. In the latter case, GVD will compute its
address automatically. Then either press Enter or click on the View
button. This will display the memory with the corresponding addresses
in the bottom text area.

   You can also specify the unit size (Byte, Halfword or Word), the
format (Hexadecimal, Decimal, Octal or ASCII), and you can display the
corresponding ASCII value at the same time.

   The up and down arrows as well as the <Page up> and <Page down> keys
in the memory text area allows you to walk through the memory in order
of ascending/descending addresses respectively.

   Finally, you can modify a memory area by simply clicking on the
location you want to modify, and by entering the new values. Modified
values will appear in a different color (red by default) and will only
be taken into account (i.e written to the target) when you click on the
Submit changes button. Clicking on the Undo changes or going up/down in
the memory will undo your editing.

   Clicking on Close will close the memory window, cancelling your last
pending changes, if any.


File: gvd.info,  Node: The Explorer Window,  Next: The Source Window,  Prev: The Memory Window,  Up: Description of the main windows

The Explorer Window
===================

The explorer window provides  fast access to the files contained in the
module you want to debug (and that have been compiled with debug
information).  Note that you can have multiple entries with the same
file name if there are identical file names in different places (which
can be either different files, e.g `/usr/include/signal.h' and
`/usr/include/sys/signal.h', or identical files reached through
different source paths).

   Each file can be opened (by clicking on the `+' icon on the left of
the file name, or double clicking on the file name, giving access to
language sensitive information such as packages, functions, tasks,
etc...  You can then open each of these sections and by selecting an
item, the source editor will select and jump to this item.

   Note: some items are disabled until an executable is loaded by means
of the Open Program, the Open Core Dump, or the Attach Process menu, or
by means of the corresponding commands in the debugger console.

   Contextual menu:
Hide System Files
     Hides the files that are part of the system.  This currently only
     affects Ada programs compiled with GNAT, and will hide the GNAT
     run-time files used by the executable.

Reload Files
     Recomputes the list of files. this is particularly useful when the
     program uses shared libraries that are not known until the program
     references them.

Delete Files Not Found
     Deletes the files that cannot be found on the file system. Note
     that this operation can take a long time to complete.

Show Current File
     Highlights the file containing the current execution point.


File: gvd.info,  Node: The Source Window,  Next: The Assembly Window,  Prev: The Explorer Window,  Up: Description of the main windows

The Source Window
=================

The source window is composed of two main areas. The first is a small
column on the left containing the following information:
Lines with code
     In this area, blue dots are present next to lines for which the
     debugger has debug information, in other words, lines that have
     been compiled with debug information and for which the compiler
     has generated some code.  Currently, GVD does not check whether
     you try to set a breakpoint on a dotted line or not, and it will
     simply send the breakpoint command to the underlying debugger.
     This will usually (e.g in the case of gdb) result in setting a
     breakpoint at the closest location that matches the file and line
     that you specified.

Current line executed
     This is a green arrow showing the line about to be executed.

Lines with breakpoints
     For lines where breakpoints have been set, a red mark is displayed
     on top of the blue dot for the line. You can add and delete
     breakpoints by clicking on this area (the first click will set a
     breakpoint, the second click will remove it).

   The second area in the source window is a text window on the right
that    displays the source files, with syntax highlighting.     If you
leave the cursor over a variable, a tooltip will    appear showing the
value of this variable. Automatic tooltips can be    disabled in the
*Note preferences menu::.

   The contextual menu of the source window contains the following
entries.  Note that these entries are dynamic, that is they will apply
to the entity found under the cursor when the menu is displayed
(depending on the current language). However, if a selection has been
made in the source window, the text of the selection will be used
instead. This allows you to display more complex expressions easily
(for example by adding some comments to your code with the complex
expressions you want to be able to display in the debugger).

Print selection
     Prints the selection (or by default the name under the cursor) in
     the debugger console.

Display selection
     Displays the selection (or by default the name under the cursor)
     in the data window. The value will be automatically refreshed each
     time the process state changes (e.g after a step or a next
     command). To freeze the display in the canvas, you can either
     click on the corresponding icon in the data window, or use the
     contextual menu for the specific item (see *Note The Data Window::
     for more information).

Print selection.all
     Dereferences the selection (or by default the name under the
     cursor) and prints the value in the debugger console.

Display selection.all
     Dereferences the selection (or by default the name under the
     cursor) and displays the value in the data window.

View memory at &selection
     Brings up the memory view dialog and explores memory at the
     address of the selection.

Set Breakpoint on Line xx
     Sets a breakpoint on the line under the cursor, in the current
     file.

Set Breakpoint on selection
     Sets a breakpoint at the beginning of the subprogram named
     selection

Continue Until Line xx
     Contines execution (the program must have been started previously)
     until it reaches the specified line.

Show Current Location
     Jumps to the current line of execution. This is particularly
     useful after navigating through your source code.

Display Line Numbers
     Enables or disable the display of line numbers on the left of the
     source editor.

Show Lines with Code
     Enables or disables the display of lines with code, as described
     above.

Show...
     A submenu composed of the following options:
    Source Code
          Shows only the source code.

    Asm Code
          Shows only the assembly code around the current execution
          point.  See *Note The Assembly Window:: for more details.

    Asm and Source
          Shows both the source code and the assembly window at the
          same time.


File: gvd.info,  Node: The Assembly Window,  Next: The Debugger Console,  Prev: The Source Window,  Up: Description of the main windows

The Assembly Window
===================

   It is often convenient to look at the assembly code for the
subprogram or source line you are currently debugging. If the
underlying debugger provides this kind of support (gdb does, but not
jdb), then GVD will fully support that kind of debugging.

   You can access the assembly window by right-clicking in the source
window, and selecting one of the menus "Show Asm Code" or "Show Asm and
Source", the later will allow you to see both the source code and the
matching assembly code.

   The current assembly instruction is, as usual, highlighted with a
green arrow on its left.  The instructions corresponding to the current
source line are highlighted in red by default. This allows you to
easily see where the program counter will point to, once you have
pressed the "Next" button on the toolbar.

   Moving to the next assembly instruction is done through the "Nexti"
(next instruction) button in the toolbar. If you choose "Stepi" instead
(step instruction), this will also jump to the subprogram being called.

   For efficiency reasons, GVD will only display a small part of the
assembly code around the current instruction.  You can specify in the
*Note preferences menu:: how many instructions are displayed by
default. Also, you can easily display the instructions immediately
preceding or following the currently displayed instructions by pressing
one of the <Page up> or <Page down> keys, or by using the contextual
menu in the assembly window.

   A critical requirement for debugging at the assembly level is the
ability of displaying the contents  of machine registers.  When the
debugger supports it (as gdb does), you can select the `Data->Display
Registers' menu to get an item in the canvas that will show the current
contents of each machine register, and that will be updated every time
one of them changes.

   You might however choose to look at a single register. Although this
is dependent on the debugger you are currently using, you can do this
with gdb by selecting the `Data->Display Any Expression', entering
something like

     output /x $eax

   in the field, and selecting the toggle button "Expression is a
subprogram call". This will create a new canvas item that will be
refreshed every time the value of the register (in this case eax)
changes.


File: gvd.info,  Node: The Debugger Console,  Next: The Status Line,  Prev: The Assembly Window,  Up: Description of the main windows

The Debugger Console
====================

This is the text window located at the bottom of the main window.  In
this console, you have direct access to the underlying debugger, and
can send commands (you need to refer to the underlying debugger's
documentation, but usually typing help will give you an overview of the
commands available).

   If the underlying debugger allows it, pressing the TAB key in this
window will provide completion for the command that is being typed (or
for its arguments).

   GVD also adds a number of commands to the debugger to provide a
simple text interface to some of its graphical features. These
commands, as documented below, enable you to create scripts that
automatically change the graphical aspect of GVD. They also permit,
through the use of the `--tty' command line option, a better
integration of GVD into other integrated environments and editors like
GNU Emacs.

   Here is the complete list of such commands. The arguments between
square brackets are optional and can be omitted.

graph (print|display) expression [dependent on display_num] [link_name name]
     This command creates a new item in the canvas, that shows the
     value of EXPRESSION. EXPRESSION should be the name of a variable,
     or one of its fields, that is in the current scope for the
     debugger.

     The command `graph print' will create a frozen item, that is not
     automatically refreshed when the debugger stops, whereas `graph
     display' displays an automatically refreshed item.

     The new item is associated with a number, that is visible in its
     title bar.  These numbers can be used to create links between the
     items, using the second argument to the command, DEPENDENT ON. The
     link itself (ie the line) can be given a name that is
     automatically displayed, using the third argument.

graph (print|display) `command`
     This command is similar to the one above, except it should be used
     to display the result of a debugger command in the canvas.

     For instance, if you want to display the value of a variable in
     hexadecimal rather than the default decimal with gdb, you should
     use a command like:

          graph display `print /x my_variable`

     This will evaluate the command between back-quotes every time the
     debugger stops, and display this in the canvas. The lines that
     have changed will be automatically highlighted (in red by default).

     This command is the one used by default to display the value of
     registers for instance.

graph (enable|disable) display display_num [display_num ...]
     This command will change the refresh status of items in the
     canvas. As explained above, items are associated with a number
     visible in their title bar.

     Using the `graph enable' command will force the item to be
     automatically refreshed every time the debugger stops, whereas the
     `graph disable' command will freeze the item.

graph undisplay display_num
     This command will remove an item from the canvas

view (source|asm|source_asm)
     This command indicates what should be displayed in the source
     window.  The first option indicates that only the source code
     should be visible, the second one specifies that only the assembly
     code should be visible, and the last one indicates that both
     should be displayed.


File: gvd.info,  Node: The Status Line,  Prev: The Debugger Console,  Up: Description of the main windows

The Status Line
===============

This is the line located at the bottom of the main window. This area
will contain information about events, and errors such as parsing
errors.  After a time out (that can be changed in the preferences
menu), each message disappears and is added to the history of messages
that can be accessed using the arrow located at the left of the status
line.


File: gvd.info,  Node: Integrating GVD,  Next: Debugging a program remotely,  Prev: Description of the main windows,  Up: Top

Integrating GVD
***************

* Menu:

* General Information::
* Using GVD with Glide::
* Using GVD with Emacs::
* Using GVD with XEmacs::
* Using GVD as a Library::
* Using GVD as a Corba Object::


File: gvd.info,  Node: General Information,  Next: Using GVD with Glide,  Up: Integrating GVD

General Information
===================

To have GVD run as an inferior in other front ends, you can either set
up      your debugger front end such that gvd -tty is invoked instead of
    the inferior debugger, or use GVD as a library.       When GVD is
invoked using the -tty option, it enables its TTY      interface,
taking additional debugger commands from standard input and
forwarding debugger output to standard output, just as if the inferior
   debugger had been invoked directly. All remaining GVD
functionalities stay      unchanged. Note that the -tty option is
currently not supported      on Windows systems.

   The -tty option also implies the GDB -fullname option, when      GDB
is used as the underlying debugger.

   You may also invoke gvd -tty directly, entering GVD commands from
 your TTY, or use GVD as the end of a pipe, controlled by a remote
program.       Be aware, however, that the TTY interface does not
support line editing and      command completion. Also, do not try to
run GVD with GVD as inferior      debugger.


File: gvd.info,  Node: Using GVD with Glide,  Next: Using GVD with Emacs,  Prev: General Information,  Up: Integrating GVD

Using GVD with Glide
====================

   Select Ada->Project->Edit Current, go in the [Ada Menu]
section, in the Debugging the application: field, enter      gvd -tty
${main}.       Save. Then launch the debugging session by using the menu
    Ada->Debug.       In the source window, you can display variables
graphically using the      contextual menu on top of a variable, or
after selecting an expression.       The display will be done in GVD's
canvas window.

   If you activate the option in the menu Ada->Options->Tight
Integration      with GVD, then a new frame from Emacs will be
swallowed directly in      the GVD window (This is currently specific
to Unix systems). This means      that the source window of GVD will be
completely replaced by the Glide      window, and thus will be a full
editor. It also provides cross-references,      which might help you
debug your code.

   If you are not using project files with Glide, you might want to
use the following lisp function to automatically start gvd on your
executable, with Glide used as the source editor. Just copy the
following      code to your `~/.emacs' configuration file (create it if
it doesn't      exist).

        (auto-load 'ada-gdb-application "ada-mode" "" t)
        (defun gvd (executable-name)
          "Start gvd on EXECUTABLE-NAME, with emacs as the source window."
          (interactive "FExecutable: ")
          (let ((ada-tight-gvd-integration t)
     	   (ada-prj-default-debugger  "gvd"))
            (ada-gdb-application nil executable-name)))


File: gvd.info,  Node: Using GVD with Emacs,  Next: Using GVD with XEmacs,  Prev: Using GVD with Glide,  Up: Integrating GVD

Using GVD with Emacs
====================

   Use M-x gdb to start a debugging session. At the prompt, enter
gvd -tty and the name of the program to be debugged. Process as
usual.

   A file `gvd.el' is provided with the GVD binaries and in the
`distrib/' directory of the GVD sources.       This file provides a
function called `gvd',      that can be used just like the standard
`gdb' command, but that      adds some special arguments to the command
line so that an Emacs frame      is automatically swallowed inside GVD
and used as the source editor (see      description in *Note Using GVD
with Glide::).

   Simply load that file in Emacs, with a command like
       (load "/complete/path/gvd.el")
        in your `.emacs' configuration file, and then use the command
  <M-x gvd> to launch GVD.


File: gvd.info,  Node: Using GVD with XEmacs,  Next: Using GVD as a Library,  Prev: Using GVD with Emacs,  Up: Integrating GVD

Using GVD with XEmacs
=====================

   In XEmacs 21 and later, select Tools->Debug (GDB). At the prompt,
 enter gvd -tty and the name of the program to be debugged.
Proceed as usual.


File: gvd.info,  Node: Using GVD as a Library,  Next: Using GVD as a Corba Object,  Prev: Using GVD with XEmacs,  Up: Integrating GVD

Using GVD as a Library
======================

   GVD can also be used as a library. Note that this is still work in
  progress. The interface provided by GVD to other programs can
be found in the file `gvd-api.ads', and `gvd-api.h'.       Note that to
integrate GVD code in Ada applications, the recommended      way is to
use the various high-level packages provided by GVD directly.       The
`gvd-api.ads' file is provided mainly for integrating GVD with other
 languages. This API is provided as a C API, so that any language that
can      interface with C can use it. For more information, refer
directly to      the `gvd-api.ads' file.


File: gvd.info,  Node: Using GVD as a Corba Object,  Prev: Using GVD as a Library,  Up: Integrating GVD

Using GVD as a Corba Object
===========================

   Future development plans of GVD include transforming GVD into a Corba
    object, so that it can be used easily by other applications in any
    language, and in particular in the context of the GNOME framework.


File: gvd.info,  Node: Debugging a program remotely,  Next: Environment,  Prev: Integrating GVD,  Up: Top

Debugging a program remotely
****************************

* Menu:

* Using GVD with a Remote Debugger::
* Using GVD with a Remote Program::

It is possible to have the inferior debugger run on a remote host. This
is useful when the remote host has a slow network connection or when
GVD is available on the local host only.

   Furthermore, the inferior debugger may support debugging a program
on a remote host. This is useful when the inferior debugger is not
available on the remote host - for instance, because the remote system
does not have a general-purpose operating system powerful enough to run
a full featured debugger. When developing in a cross environment (e.g
VxWorks, Lynx OS), you will be in such situation.


File: gvd.info,  Node: Using GVD with a Remote Debugger,  Next: Using GVD with a Remote Program,  Up: Debugging a program remotely

Using GVD with a Remote Debugger
================================

   To debug a program running on a remote machine you have two main
options: either run GVD on the remote machine, using the remote
capabilities of the X windowing system; or run GVD on the host machine,
and run the underlying debugger on the remote machine.

   For the first option,  you must open a shell on the remote machine
(using e.g telnet or rlogin), set the DISPLAY environment variable to
the value of your local display, and launch gvd from your remote
machine.  For example, assuming your local machine is called local, and
your display is the default display local:0, your remote machine is
called remote.  you can do the following (assuming you are using an
sh-like shell):

     $ rlogin remote
     $ DISPLAY=local:0
     $ export DISPLAY
     $ gvd

   You also need to ensure that remote is allowed to access local:0 by
e.g using the xhost utility on Unix.

   For the second option, gvd will internally use the standard rsh and
rcp utilities. These are standard tools available on all Unix systems
and on Windows NT/2000 as well.

   First make sure that rsh/rcp can be used from your local to your
remote machine without having to enter a password. This is usually done
via the configuration of a .rhosts file in your remote home directory
that will typically look like:

     local user-name

   local is the name of the local machine you want to rlogin from, and
the .rhosts file needs to be present in the home directory on the
remote machine.

   To check whether you can use gvd in remote mode, try the following,
using a shell window on your local machine:

     $ rsh remote gdb

   This should launch gdb on the remote machine.

   Note that on some systems, rsh is called differently. In particular
under HPUX, the remote shell capability is called remsh. For those
systems, and also in order to use other remote utilities such as
ssh/scp, you can change the default remote shell and copy by using the
*Note helpers menu::.

   After ensuring that you have the proper setup in place, to run the
debugger on a remote host remote, either invoke GVD as

     gvd --host 'remote' remote-program

   or use the File->New Debugger... menu in GVD.

   If you need to use a different username on the remote host, you can
replace remote by user@remote where user is the username on the remote
machine, and remote is the remote machine, as previousely explained.
To verify that this is supported by your version of rsh, try the
following:

     $ rsh user@remote gdb

   If this does not work, you can create a simple script that transforms
user@remote into the proper syntax, e.g. remote -l user and specify
this script as the default remote shell and copy programs.

   There are a few caveats to be aware of in remote mode:

   The remote debugger is started in your remote home directory. Hence,
you must   specify an absolute path name for remote-program (or a path
name relative   to your remote home directory). The same applies to
remote core files.    Also, be sure to specify a remote process id when
debugging a running program.

   To access files remotely, GVD will first try to read the files
locally,   assuming that you have the remote files mounted locally at
the same   location (using e.g NFS+symbolic links, or Samba). If GVD it
cannot find the   files locally, it will then try to copy the files
from the remote machine,   using rcp. As for rsh, you need to make sure
that rcp can be called without   having to enter a password, and you
can also replace rcp by similar remote   copy utilities such as scp.
Note that the file   selection dialogs (change directory, open file,
...) will scan the local   directory, so you will need to know in
advance the complete path if your   remote files are not mounted on
your local host.


File: gvd.info,  Node: Using GVD with a Remote Program,  Prev: Using GVD with a Remote Debugger,  Up: Debugging a program remotely

Using GVD with a Remote Program
===============================

   The GDB debugger allows you to run the debugger program on a remote
machine (called program host) while GDB runs on the local machine.

   The section Remote debugging in the GDB documentation contains all
the   details. Basically, the following steps are required:

   Transfer the executable to the remote target.

   Optionally start gdbserver on the remote target (e.g on Lynx OS).
This     is not needed for environments such as VxWorks.

   Start GVD using a properly configured cross GDB, e.g
powerpc-wrs-vxworks-gdb   for a GDB configured for VxWorks PowerPC and
specify the name of the remote   target, as well as the protocol used
to communicate with it. To specify   the cross-GDB and the remote
target, you can use either the -debugger and   -target command line
options, e.g:

     gvd --debugger powerpc-wrs-vxworks-gdb --target my_target:wtx

   or using the Debugger Name, Program Host and Protocol entries in
the File->New Debugger menu item.

   You can also combine GVD remote mode and GDB remote mode, running
GVD, GDB and the debugged program each on a different machine.


File: gvd.info,  Node: Environment,  Next: Frequently Asked Questions,  Prev: Debugging a program remotely,  Up: Top

Environment
***********

* Menu:

* Command Line Options::
* Environment Variables::
* Files::
* Limitations::
* Reporting bugs::


File: gvd.info,  Node: Command Line Options,  Next: Environment Variables,  Up: Environment

Command Line Options
====================

     Usage:
        gvd [options...] executable-file
            [--dargs [debugger options]] [--pargs [program options]]

The options recognized by GVD are:

-debugger DEBUG
     use DEBUG as the underlying debugger.

-jdb
     assume a Java debugger. This option is currently not fully
     supported.

-host HOST
     Run inferior debugger on HOST. See *Note Using GVD with a Remote
     Debugger:: for more information.

-target TARG:PRO
     Load program on machine TARG using protocol PRO.  Note that TARG
     can contain the `:' character for e.g specifying the port number.
     The last colon will be used by GVD as the separator between the
     target and the protocol. For instance, assuming you want to connect
     to a board named bare on port 1234 using the remote protocol, you
     would specify:

          gvd --target bare:1234:remote

     See *Note Using GVD with a Remote Program:: for more information.

-log-level [0-4]
     Set level of logging (Default is 3).  This option can be useful
     when reporting bugs in GVD, in which case the maximum level of
     logs (4) gives more details, but will also generate more disk
     activity, which can slow down GVD significantly if the log file is
     located through a network disk.

-editor-window=xid
     Use xid as the editor X window id.  GVD takes advantage of this
     option by integrating the specified window as the source editor.
     This option is not currently supported on Windows.  Note that the
     best way to use this option is directly through Glide or Emacs, as
     explained in *Note Using GVD with Glide::. Glide will
     automatically pass the correct xid value.

-tty
     Use controlling tty as the debugger console.  This option is very
     useful for integrating GVD in other debugger front ends (e.g
     Emacs), since in this mode, GVD appears as the underlying debugger
     to the caller. See *Note Integrating GVD:: for more details.  This
     option is not currently supported on Windows.

-version
     Show the GVD version and exit.

The `--dargs' section let you specify an arbitrary number of options to
pass to the underlying debugger.

Similarly, the `--pargs' section let you specify options to pass to the
debugged program.

For example, if you want to pass the `--nx' option to GDB, and the
options `--file foo --version' to the debugged program `my_code' you
would launch GVD as follows:

     gvd my_code --dargs --nx --pargs --file foo --version


File: gvd.info,  Node: Environment Variables,  Next: Files,  Prev: Command Line Options,  Up: Environment

Environment Variables
=====================

The following environment variables can be set to override some default
settings in GVD:

`GVD_ROOT.'
     Override the default root directory specified when GVD is built
     (during the configure process, see the file `INSTALL' in the GVD
     sources for more details) to access information such as the
     location of the translation files.

`GVD_HOME.'
     Override the variable HOME if present. All the configuration files
     and directories used by GVD are either relative to $HOME/.gvd
     (%HOME%\.gvd under Windows) if GVD_HOME is not set, or to
     $GVD_HOME/.gvd (respectively %GVD_HOME%\.gvd) if set.

`GVD_EDITOR.'
     Override the default editor as found in the *Note helpers menu::.


File: gvd.info,  Node: Files,  Next: Limitations,  Prev: Environment Variables,  Up: Environment

Files
=====

`$HOME/.gvd'
     GVD state directory

`$HOME/.gvd/log'
     Log file created automatically by GVD. This log file contains all
     the input and output exchanged between GVD and the underlying
     debugger. You can specify the level of logs (from no log to very
     verbose) by using the `--log-level' command line option. Using a
     high level of log can be useful to track communication problems
     between GVD and the underlying debugger, but will slow down GVD if
     $HOME is located on a network disk.

`$HOME/.gvd/preferences'
     Contains all the preferences in XML format, as specified in the
     *Note preferences menu::.

`$HOME/.gvd/window_settings'
     Contains all the settings of the windows (window sizes, pane
     offset) in XML format. These settings are saved automatically when
     quitting GVD, and loaded automatically at start up. To reset the
     settings, simply remove this file.

`$HOME/.gvd/sessions'
     Directory containing the GVD sessions.

`$HOME/.gvd/sessions/session'
     Each file in the `sessions' directory represents a particular
     session saved by the user.

`$HOME/.gdbinit   GDB initialization file'

File: gvd.info,  Node: Limitations,  Next: Reporting bugs,  Prev: Files,  Up: Environment

Limitations
===========

* Menu:

* General Limitations::
* Limitations using GDB::


File: gvd.info,  Node: General Limitations,  Next: Limitations using GDB,  Up: Limitations

General Limitations
-------------------

If command output is sent to the debugger console, it is impossible for
GVD     to distinguish between the output of the debugged program and
the output      of the inferior debugger. This problem can be avoided
by launching the      program separately and then attaching it in GVD.

   Output that confuses GVD includes:

   * Primary debugger prompts (e.g '(gdb) ')

   * Secondary debugger prompts (e.g '>')

   * Confirmation prompts (e.g '(y or n)')

   If your program outputs any of these strings, you should run it in
the      separate execution window.

   If the inferior debugger changes the default TTY settings, for
instance      through a stty command in its initialization file, GVD
will likely      become confused. The same applies to debugged program
which change the      default TTY settings.


File: gvd.info,  Node: Limitations using GDB,  Prev: General Limitations,  Up: Limitations

Limitations using GDB
---------------------

Some GDB settings are essential for GVD to work correctly. These
settings      with their correct values are:

   * set height 0

   * set width 0

   * set verbose off

   * set prompt (gdb)

   GVD sets these values automatically when invoking GDB; if these
values      are changed, there may be some malfunctions, especially in
the data      display.


File: gvd.info,  Node: Reporting bugs,  Prev: Limitations,  Up: Environment

Reporting bugs
==============

If you encounter a bug in GVD, you can report it to
`mailto:report@gnat.com' if you are a supported user (to become a
supported user, contact `mailto:sales@gnat.com'), or to the public gvd
development list (`mailto:gvd-devel@lists.act-europe.fr').

   Please try to include a detailed description of the problem,
including sources to reproduce it if possible, and/or a scenario
describing the actions performed to reproduce the problem. Saving your
session and the log file (see *Note log file::) can help automate this
process.


File: gvd.info,  Node: Frequently Asked Questions,  Prev: Environment,  Up: Top

Frequently Asked Questions
**************************

This chapter includes the answers to some questions that are frequently
asked by people trying to use GVD for specific tasks. Some of the
answers are not specific to GVD itself, but rather to the underlying
debugger.

   * My Ada program seems to fail during elaboration. How can I debug
     it ?

       A. If your program was compiled with GNAT, the main program is
          generated by the binder. This program is an ordinary Ada (or
          C if the `-C' switch was used) program, compiled in the usual
          manner, and fully debuggable provided that the `-g' switch is
          used on the `gnatlink' command (or -g is used in the
          `gnatmake' command itself).

          The name of this package containing the main program is
          `b~xxx.ads/adb' where xxx is the name of the Ada main unit
          given in the gnatbind command, and you can edit and debug
          this file in the normal manner. You will see a series of
          calls to the elaboration routines of the packages, and you
          can debug these in the usual manner, just as if you were
          debugging code in your application.


   * How can I debug the Ada run-time library ?

       A. The run time distributed in binary versions of GNAT hasn't
          been compiled with debug information. Thus, it needs to be
          recompiled before you can actually debug it.

          The simplest is to recompile your application by adding the
          switches `-a' and `-f' to the `gnatmake' command line. This
          extra step is then no longer required, assuming that you keep
          the generated object and ali files corresponding to the GNAT
          run time available.

          Another possibility on unix systems is to use the file
          `Makefile.adalib' that can be found in the adalib directory
          of your GNAT installation and specify e.g `-g -O2' for the
          `CFLAGS' switches.





Tag Table:
Node: Top67
Node: Introduction1467
Node: Description of the main windows2090
Node: The Menu Bar2495
Ref: open program menu3133
Ref: new debugger menu3500
Ref: core files4333
Ref: open source menu5377
Ref: close menu7683
Ref: preferences menu8146
Ref: hiding big items12231
Ref: Show Call Stack12820
Ref: helpers menu14114
Ref: HTML browser15235
Node: The Tool Bar20674
Node: The Call Stack Window22269
Node: The Data Window23732
Node: The Memory Window32450
Node: The Explorer Window33965
Node: The Source Window35756
Node: The Assembly Window39942
Node: The Debugger Console42411
Node: The Status Line45919
Node: Integrating GVD46411
Node: General Information46742
Node: Using GVD with Glide47890
Node: Using GVD with Emacs49562
Node: Using GVD with XEmacs50492
Node: Using GVD as a Library50815
Node: Using GVD as a Corba Object51596
Node: Debugging a program remotely51976
Node: Using GVD with a Remote Debugger52811
Node: Using GVD with a Remote Program56780
Node: Environment58076
Node: Command Line Options58327
Node: Environment Variables60941
Ref: GVD_EDITOR61730
Node: Files61802
Ref: log file61971
Node: Limitations63076
Node: General Limitations63254
Node: Limitations using GDB64203
Node: Reporting bugs64697
Node: Frequently Asked Questions65337

End Tag Table
